Memoirs of the School of Engineering. v.36.no.1-v.40.no.2


(v.40.no.2, 1988)

Hiroshi Ota, Kazuki Mizutani, Tadao Kawai

  Chatters of a workpiece arising in lathes. pp.163-208

Kimihiko Yasuda, Takao Torii

  A Study on the Multi-mode response of continuous systems. pp.209-272

Yasuaki Ichikawa, Takashi Kyoya, Omer Aydan, Kazuhito Yoshikawa,

Toshikazu Kawamoto, Naohiko Tokashiki

  Deformation and failure of rocks under "weak" cyclic loading and

  incremental elasto-plasticity theory.  pp.273-326

(Research report)

Hideomi Fujita, Masafumi Hirota, Hajime Yokosawa

  Forced convection heat transfer in a turbulent flow through a square

  duct. pp.327-336

Jang-Soo Choi, Keun-Shik Chang, Yoshiyuki Sugiyama

  An application of the surface-singularity method to wing-body-tail

  configurations.  pp.337-350

A.Koichi Hayashi, Minoru Matsuda, Toshi Fujiwara

  Numerical study on gas-solid two-phase nozzle and jet flows.

  pp.351-362

Yoshiro Ohara

  General tooth surface with zero specific sliding.  pp.363-372

(v.40.no.1, 1988)

Genji Jimbo, Ryohei Yamazaki, Jun-Ichiro Tsubaki, Hidehiro Kamiya

  Development of measuring and characterizing methods of mechanical

  properties of powder particles.  pp.1-66

Nobuo Nakahara, Kazunobu Sagara, Makoto Tsujimoto, Masaya Okumiya

  Study on the performance of water thermal storage.  pp.67-120

(Research report)

Tadaya Ito, Kenji Hase, Yoshikazu Suematsu, Toshiyuki Hayase

  Numerical method for distribution of eigenvalues in laminar pipe

  flows.  pp.121-134

Norio Arai, Masanobu Hasatani

  Competitive formation of NO and N2 from both the emission sources of

  NH3 and coal char-bound nitrogen compounds during the combustion of

  coal.  pp.135-148

K.V.Reddy, Toshi Fujiwara, J.H.Lee

  Role of trnasverse waves in a detonation wave - a study based on

  propagation in a porous wall chamber.  pp.149-162

(v.39.no.2, 1987)

Toru Imura, Hiroyasu Saka, Tatsumasa Kobayashi, Nozomu Kawabe,

Akira Sakai, Hisaaki Suga

  Dynamical studies of microstructural changes of crystals by real time

@x-ray topography.  pp.195-262

Toshi Fujiwara, Kazuhiro Horie, K.V.Reddy, Kazumi Masuda

  Thermogasdynamics of hypervelocity vehicle. pp.263-323

Tamaki Watanabe, Chizuo Mori, Hiroshi Miyahara, Takahiko Aoyama

  Measurement of radiation and radioactivity.  pp.324-395

(Research report)

K.V.Reddy, Toshi Fujiwara

  Computation of hypervelocity three-dimensional reacting flows.

  pp.396  -412

(v.39.no.1, 1987)

Hiroshi Ota, Masayoshi Kato

  On the lateral vibrations of a rotating shaft driven by a universal

  joint.  pp.1-61

Yuhsuke Kawakami, Yuya Yamashita

  Molecular design of polymeric systems for oxygen permselective

  membrane materials.  pp.62-91

Iwao Muchi, Shigeo Asai, Mamoru Kuwabara

  Principles of metallurgical reaction engineering.  pp.92-145

(Research report)

Seiichiro Kitaoka, Jianqiao Chen, Masaichiro Seika

  Effect of crack closure on the threshold of micro fatigue crake

  propagation under mixed mode.  pp.146-154

Seiichiro Kitaoka, Kazuhiko Ohshima

  On the stress measurement method using grain growth process of

@electro deposited copper foil.  pp.155-162

Toshi Fujiwara, Takashi Nishiwaki

  A strong shock wave supported by the absorption of laser.  pp.163-179

Yi-Yun Wang, Toshi Fujiwara

  Improvements on accuracy and efficiency for calculation of transonic

  viscous flow around an airfoil.  pp.180-193  

(v.38. no.2, 1986)

Masayuki Ieda, Guo-xiong Cai, Yasuo Suzuoki, Teruyoshi Mizutani

  Effects of polymer-polymer interfaces on electrical properties of

  insulationg composites.  pp.137-182

Kazumasa Hiramatsu, Isamu Akasaki, Nobuhiko Sawaki

  LPE growth of InGaAsP epitaxial layers on GaAs substrates.  pp.183-207

(Research report)

Shinobu Kato, Etsuo Marui, Masatoshi Hashimoto, Toshikatsu Yamada

  Characteristics of chatter vibration of lathe tools.  pp.208-215

Shinobu Kato, Etsuo Marui, Masatoshi Hashimoto, Toshikatsu Yamada

  Characteristics of dynamic cutting force and mechanism of chatter

  vibration.  pp.216-222

Shinobu Kato, Etsuo Marui, Masatoshi Hashimoto, Toshikatsu Yamada

  Analytical considerations of chatter vibration of lathe tools.

  pp.223-232

Yoshiyuki Sugiyama, Yoshio Kojima, Fumio Niwa

  A Three-dimensional flow field around a turbulent jet injected

  normally into a confined cross flow.  pp.233-246 

Toshi Fujiwara, Takashi Koizumi

  Stability of free shear layer.  pp.247-260

Hiroyuki Yamada, Toshi Fujiwara

  Computational fluid dynamics study of an MPD thruster.  pp.261-278

Yoshiro Ohara

  On a functional equation which is sattisfied with tooth surfaces.

  pp.279-286

(v.38, no.1, 1986)

Nobuo Goro, Yasumitsu Miyazaki, Yasuo Akao

  Study of waveguide-type optical separators using acousto-optic

  effects.  pp.1-41

Mompei Shirato, Toshiro Murase, Masashi Iwata

  Theoretical and experimental studies in expression.  pp.42-85

Koichi Hayashi, Toshi Fujiwara

  Sensitivity analysis in chemical kinetics modeling.  pp.86-123

(Research report)

Hiroshi Takeuchi, Katsuroku Takahashi, Naoko Tekenouchi

  Effect of addition of lignins on liquid phase oxidation of sulfides

  with oxygen.  pp.124-136

(v.37, no.2, 1985)

Tadaya Ito, Yoshikazu Suematsu,Toshiyuki Hayase

  On the vortex breakdown phenomena in a swirling pipe-flow.  pp.117-172

Ichiro Sugiura

  Airplane landing behaviors controlled by Man-pilots.  pp.173-202

(Research report)

Toshi Fujiwara, Yi-Yun Wang, Yasunori Ohmori

  Turbulent transonic flow for NACA 0012/RAE 2822 airfoils under

  Baldwin-Lomax model.  pp.203-218

(v.37,no.1, 1985)

Shinobu Kato, Etsuo Marui, Kiyoo Tachi

  Frictional properties of a surface covered with a soft metal film.

  pp.1-37

Mompei Shirato, Masao Sambuichi, Toshiro Murase, Tsutomu Aragaki,

Kazumasa Kobayashi, Eiji Iritani

  Theoretical and experimental studies in cake filtration.  pp.38-92

(Research report)

Chobei Yamabe, Hidenori Akiyama, Kenji Horii

  Development of new type ozonizer.  pp.93-104

Atsushi Mizuta, Kayo Ide, Toshi Fujiwara

  Computational code of interplanetary trajectory of a spacecraft

  : application to Galileo mission.  pp.105-116 

(v.36, no.2, 1984)

Yasuhisa Tozawa, Takashi Ishikawa

  Study on stress distribution in strip rolling : rolling pressure and

  stresses at the upper stream side of roll gap.  pp.79-117

Shintaro Otsuka

  Supplements to "Theory of secondary flow in cascades"  pp.118-137

Yi-Yun Wang, Toshi Fujiwara

  Numerical analysis of transonic flow around a two-dimensional

  airfoil by solving full navier-stokes equations.  pp.138-178  

(Research reports)

Sumio Murakami, Nobutada Ohno

  Constitutive equations of creep and creep damage in polycrystalline

  metals.  pp.179-190

Ryotaro Izumi, Hiroshi Yamashita, Sadamu Kaga

  Fluid flow and heat transfer in corrugated wall channels.  pp.191-204

(v.36, no.1, 1984)

Ryotaro Izumi, Hayato Maeda, Hiroshi Yamashita

  Study on rotating condenser with a scraper.  pp.1-35

Isao Masumoto

  Effect of solidification phases on metallurgical and mechanical

  behavior of steel weld metals.  pp 36-67

(Research reports)

Yi-Yun Wang, Toshi Fujiwara

  The numerical analysis of transonic flow around a circular airfoil

  using hybrid difference scheme.  pp.68-78