Memoirs of the School of Engineering. v.26.no.1-v.30.no.2


(v.30, no.2, 1978)

Iwao Miyachi

  Theoretical approach to the switching ARC phenomena in electric

  power systems.  pp.169-199

Kazuo Fukuzumi

  Studies on the reaction of fats and oils-hydrolysis, autoxidation,

  hydrogenation,etc.  pp.200-244

Shinzi Kuwabara

  Statistical hydrodynamics for the burgers turbulence. pp.245-288

(v.30, no.1, 1978)

Yoshimasa Furuya, Ikuo Nakamura, Shintaro Yamashita

  The laminar and turbulent boundary layers on some rotating bodies in

  axial flows.  p.1-58

Toshio Yamamoto, Yukio Ishida

  On the vibrations of a shaft with nonlinear spring characteristics.

  pp.59-109

Sachio Sugiyama, Masanobu Hasatani

  Unsteady heat conduction accompanied by an endothermic solid

  reaction.  pp110-151

(Research report)

Toshitaka Fujii, Takashi Shinoda, Shigeru Shiomi, Sususmu Uchiyama

  Analysis of dynamic character of one-dimensional domain wall motion

  biased by static in-plane field.  pp.152-168

(v.29, no.2, 1977)

Seiki Nishi, Tetsuyuki Ikeda

  A study on Al-Mn alloys solidified by rapid cooling. pp.123-164

Shintaro Otsuka

 Theory of secondary flow in cascades. pp.165-231

(Research report)

Yoshimasa Furuya, Ikuo Nakamura, Hiroya Yamada

  On the characteristics of the two-dimensional diffusers with suction

  through parallel porous side walls. pp.232-245

Takeo Soga, Yoshihisa Osaki

  Kinetic theory of one-dimensional evaporation and condensation

  problem.  p.246-259

Takeo Soga, Yoshihisa Osaki

  Effects of accomodation coefficients on evaporation and

  condensation.  pp.260-273

(v.29, no.1, 1977)

Masayuki Ieda, Yoshiaki Takai, Teruyoshi Mizutani

  Photoconduction processes in polymers. pp.1-59

Koji Ito, Masami Ito

  On the predictive precognitive and preview manual tracking systems.

  pp.60-114

(Research report)

Tsugio Takeuchi, Kuniyuki Kitagawa, Hideki Jinno

  Determination of ambient concentration of NO by chemiluminescence

  and elimination of trace impurity NOx in diluent gas used for

  calibration.  pp.115-121

(v.28, no.2, 1976)

Hisao Mii, Ikuya Fujishiro, Masafumi Senoo

  Compression of metals and effects of pressure on defective lattice.

  pp.191-236

Mituo Ono, Shunkiti Hirokawa, Hideo Nagai

  On the optical properties of irradiated cobalt glass and other

  glasses.   pp.237-264

Shigeharu Naka, Suketoshi Ito, Tetsuya Kameyama, Michio Inagaki

  Crystallization of coesite. pp.265-316

(Research report)

Katumi Yamaguchi, Shigeaki Kita, Iwao Horaguchi

  Some considerations on the flow of cutting fluid between tool and

  chip.  pp.317-324

(v.28, no.1, 1976)

Yoshio Ishii, Kenji Itoh

  Synthesis, reaction and structural determination of novel

  organotransition metal complexes. pp.1-53

Toru Imura, Hiroyasu Saka

  In situ dynamic observations of dislocation behaviour in metals and

  alloys by high voltage electron microscopy. pp.54-112

Shizuo Shimada

  Aseismic surveys of existing tall concrete chimneys.  pp.113-157

(Research report)

Mitsukiyo Murakami, Osami Kito

  Swirling flow in circular pipes. pp.158-172

Yasuo Kasuga, Shigeaki Tsutsumi, Toshihiko Mori

  Pressure sensitive pin applicable to the shearing test.  pp.173-183

Shikoh Itoh, Hajime Tamagawa

  Rigorous treatment of the spectral distortion caused by the use of

  time-to-amplitude converter.  pp.184-189

(v.27, no.2, 1975)

Minoru Ueda, Kazuhide Iwata, Toshio Shimizu, Itsuo Sakai

  Sensors and systems of an industrial robot.  pp.163-207

Yasuo Tanigawa, Yoshio Kosaka

  Mechanism of fracture and failure of concrete as a composite

  material.  pp.208-263

(Research reports)

Hiroshi Ota, Nobutaka Mizuno, Yasuhide Kanbe

  Flexible mounting and optimum damping for suppressing rotor

  resonance near critical speeds.  pp.264-286

Salah Owies, Yasuo Shimada, Hiroyuki Saiki, Nozomu Kawai

  Examination of some processing variables to improve the

  press-formability of aluminium sheets.  pp.287-294

(v.27, no.1, 1975)

Shinobu Kato, Katsmi Yamaguchi, Tsuneo Matsubayashi, Norio Sato

  Stick-slip motion and characteristics of friction in machine tool

  slideway.  pp.1-71

Hiroyasu Nomura, Shigeo Kato, Yutaka Miyahara

  Ultrasonic absorption in polymer solutions.  pp.72-125

(Research reports)

Shigeyoshi miyajima

  Electrohydrodynamics in the wide sense.  pp.126-141

Teruaki Shoji, Takayoshi Okuda

  Equilibrium of axially symmetric toroidal plasma with a rectangular

  cross section.  pp.142-151

Shigeo Uchida, Mamoru Endo

  On some numerical solutions of the flow through a back-step 

  channnel.  pp.152-161

(v.26, no.2, 1974)

Kakusaburo Onda, Katsuroku Takahashi

  Plate and column efficiencies for rectifying column.  pp.141-182

Shigeo Uchida, Yoshiaki Nakamura

  On the potential theory of distributed singularities and its edge

  condition for a lifting flow of three-dimensional body.  pp.183-208

(Research reports)

Salah Owies, Akio Aoyama, Hiroyuki Saiki, Nozomu Kawai

  Improvement of the press-formability of aluminium sheets through the

   control of annealing conditions.  pp.209-223

Salah Owies, Masanori Kobayashi, Hiroyuki Saiki, Nozomu Kawai

  Effect of cold-reduction on the press-formability of annealed

  alumium sheets.  pp.224-235

Shintaro Otsuka, Takashi Aoki

  The relation between turning angle and axial velocity ratio of solid

  wall compressor cascades.  pp.236-244

(v.26, no.1, 1974)

Yoshio Ohashi, Tadashi Nishitani

  Photo-rheology, a new method of experimental stress analysis for

  elastic-viscoplastic body.  pp.1-53

Shigeyuki Hosoe, Masami Ito

  On steady-state charcteristics of linear multivariable systems.

  pp.54-85

(Research reports)

Mitsukiyo Murakami, Yukimaru Shimizu

  Experimental formulae onf the hydraulic loss in pipe bends.  pp.86-108

Toshitaka Fujii, Susumu Uchiyama, Makoto Takayasu, Katsumi Takahashi

  Die magnetischen Eigenschaften von Aufgedampften dunnen Schichten des

  trinaren Systems Ni-Fe-Co.  pp.109-123

Shintaro Otsuka

  A few considerations on the trailing vortex appearing in the

 axisymmetric theory and the secondary flow theory.  pp.124-140