Memoirs of the School of Engineering. v.21.no.1-v.25.no.2


(v.25, no.2, 1973)

Yasuo Kasuga, Shigeaki Tsutsumi, Hiroyuki Saiki

  Material flow in sunken forging-dies.  pp.89-128

Matsuhei Ichihara, Nobuo Mori, Susumu Nakane, Itsuo Hirano

  Passive earth pressure coefficient during earthquake.  pp.129-179

(v.25, no.1, 1973)

Hidenori Ito, Yasuyoshi Inagaki, Teruo Fukumura

  Hierarchical studies of dendrolanguages with and application to

  characterizing derivation trees of phrase structure grammars.  pp.1-46

Tomoo Kirihara, Tomiyoshi Sakakura, Michio Iseki, Hirofumi Oshima

  Electro-deposition and electro-dissolution of metals in fused salts.

  pp.47-71

(Research reports)

Yutaka Ogane, Isamu Hagino, Toshio Yamada, Toshikiyo Tanaka,

Shigeki Miyajima.

  Perfectly diamagnetic pinched plasma.  pp.72-80

Takaaki Hashimoto, Shintaro Otsuka, Sadamu Futsukaichi

  The characteristics of a cylindrical probe at high subsonic speeds.

  Part 2. The case having inclination angles.  pp.81-88  

(v.24, no.2, 1972)

Michio Inouye, Yoshiaki Iguchi

  Studies of the characteristic behaviors of sponge-irons and reduced

  pellets.  pp.119-164

Kakusaburo Onda

  Gas absorption in packed column.  pp.165-215

Mitsuhiko Hayashi

  Domain wall motion in ferroelectric switching.  pp.216-269

(Research reports)

Mitsukiyo Murakami, Hakaru Suehiro, Masanao Ono

  A study on the hydraulic loss of spirally coiled tubes.  pp.270-277

Yoshimasa Furuya, Masafumi Miyata

  Visual studies on the wake of a roughness element proximate to a

  wall.  pp.278-293

(v.24, no.1, 1972)

Toshio Yamamoto, Hiroshi Ota, Kazutoyo Kono

  On the vibrations of a rotor with rotating inequality and with

  variable rotating speed.  pp.1-80

Shiro Kato, Osamu Matsuoka

  Continuum theory of latticed shells.  pp.81-111

(Research report)

Shintaro Otsuka, Isao Katou, Katsuhiko Sugiyama

  Preliminary investigations about the effect of Reynolds number on

  the flow through cascade of compressor blades.  pp.112-118

(v.23, no.2, 1971)

Sumio Murakami 

  Creep in shells of revolution.  pp.173-221

Fusetsu Takagi

  A study on the dynamic process of ground water runoff.  pp.222-285

(Research reports)

Yoshio Ohashi, Tadashi Nishitani

  Stress analysis in two dimensional bending process using the

  photo-rheological stress analysis.  pp.286-298

Shintaro Otsuka, Takaaki Hashimoto, Sadamu Futsukaichi, Shinya Yokoi

  The characteristics of a cylindrical probe at high subsonic speeds.

  part 1: The case of zero inclination angle

Toshitaka Fujiwara, Makoto Sugimura, Hiroyuki Inagawa

  Oxyhydrogen detonations near pressure limit.  pp.299-308

Hitoshi Sasai

  On the convergence of difference approximations in distributed

  parameter optimal control problems.  pp.316-325

Moriya Oda, Baxter F. Womack

  Special multimodality and adaptivity in renju game.  pp.326-341

(v.23, no.1, 1971)

Yasuji Miyake, Mahito Ichikawa

  Error analysis, design theory and favorable operational condition

  of electronic analog multipliers and dividers.  pp.1-62

Kiyoshi Kubota, Noriyoshi Morita

  Kinetic studies of thermal and catalytic cracking of light

  hydrocarbons.  pp.63-101

(Research reports)

Yoshimasa Furuya, Hideo Osaka, Takehiro Kushida

  Low turbulence wind tunnel of Nagoya Univ.  pp.102-111

Akira Iguchi, Tadasu Maki

  Heat and mass transfer from a shrouded rotating disk.  pp.112-123

Mitsukiyo Murakami, Kiyoshi Minemura, Hakaru Suehiro

  Effects of entrained air on the performance of centrifugal and axial

  flow pumps.  pp.124-133

Michio Hibino, Susumu Uchiyama

  Observations of the magnetic anisotropy and the magnetization

  reversal in local regions of a permalloy thin film by Lorentz

  microscopy.  pp.134-142

Shigeyuki Hosoe, Kimihito Furuta, Masami Ito

  Zero assignment in linear multivariable decoupled control system.

  pp.143-154

Kahei Nakamura, Moriya Oda

  heuristics and learning control (Introduction to intelligent

  control).  pp.155-164

Kahei Nakamura

  A control system improving its control dynamics by learning.

  pp.165-171

(v.22, no.2, 1970)

Yoshio Ogata, Yoshio Kosugi

  Studies on autoxidation and determination of L-ascorbic acid.

  pp.165-195

Hung Liang Kuo

  On the thermo-mechanical properties of rheological media.  pp.196-244

(Research reports)

Masaichiro Seika, Kiyoshi Isogimi

  Photoelastic analysis of the maximum stress in a wide plate with an

  asymmetrically reinforced circular hole under tension-effects of

  rounded corner at hole edge.  pp.245-252

Kengo Adachi, Kiyoo Sato, Kiyoshi Kojima

  Neutron diffraction study of FeCr2Se4.  pp.253-261

Tetsuo Fujimoto, Seijo Kato

  Rarefied gas flow through a pipe orifice. pp.262-275

Shigeo Uchida, Kosei Kuwabara, Kuniyoshi Furuhashi

  An investigation on the flow through a hypersonic nozzle in

  shock-gun tunnel.  pp.276-290

(v.22, no.1, 1970)

Shinobu Kato, Etsuo Marui

  Some considerations on prevention on chatter vibration in multi-edge

  rotary cutting tools.  pp.1-53 

Toshio Yamamoto, Akihiko Saito

  On the vibrations of "summed and differential types" under

  parametric excitation.  pp.54-123 

(Research reports)

Ikuya Fujishiro, Hisao Mii, Soichiro Kato 

  Fracture energy of polymethylmethacrylate.  pp.124-134

Shintaro Otsuka, Showgo Hayashi 

  Performances of Cascade of blades with small aspect ratio.

  Part.1 Performances at the center of blade span.  pp.135-145

Takeo Oki, Yoshihiko Kunieda 

  A study on the anodic dissolution of lead sulphide and cupric

  sulphide. pp.146-154 

Kazuhisa Okajima, Hiroshi Sakao 

  The rule on phase construction of the binary alloys.  pp.155-164

(v.21, no.2 1969)

Yasuyuki Funahashi, Takumi Nomura, Kahei Nakamura 

  Optimal control of distributed parameter systems.  pp.189-249

Minoru Kawano, Yukimasa Ikebe, Yoshiyuki Nakashima, Takeyoshi Nakayama,

Michikuni Shimo, Susumu Minato, Takao Iida 

  Some properties of ionizing radiations and radioactive ions in the

  natural environment.  pp.250-272

(Research Reports)

Yasushi Kojima, Michio Inouye, Junichi Ohi   

  Titanoxyd im gleichgewicht mit eisen-titan-legierung bei 1600 C.

  pp.273-286

Toshio Yamamoto, Hiroshi Ota, Kazutoyo Kono 

  The effect of flat shaft on the unstable vibrations of a shaft

  carrying an unsymmetrical rotor (Part II. experimental treatment).

  pp.287-293

Toshio Goto, Koichi Nakamura, Shuzo Hattori 

  Characteristics of output powers of pulsed argon-ion lasers in gas

  mixtures.  pp.294-302

Yoshio Ohashi, Norio Kamiya 

  On the large deflection of an annular plate of the material having a

  non-linear stress-strain relation.  pp.303-316

Shigeo Uchida 

  An investigation on the interaction between a supersonic boundary

  layer and a shock wave produced by the wedge.  pp.317-330 

Kyoshi Watanabe, Hiroo Hirano, Shigeo Uchida

  On the characteristics of two-dimensional slide plate of ground

  effect machines with small attack angle.  pp.331-342

(v.21, no.1, 1969)

Toshio Yamamoto, Hiroshi Ota

  On the vibrations of a shaft carrying and unsymmetrical rotor.

  pp.1-78

Yoshio Ohashi, Sumio Murakami

  Axisymmetric elasto-plastic deformation of circular plates under

  combined action of lateral load and membrane force.  pp.79-121

(Research Reports)

Toshio Yamamoto, Hiroshi Ota, Kazutoyo Kono

  The effect of flat shaft on the unstable vbirations of a shaft

  carrying an unsymmetrical rotor.(Part.1. Analytical treatment).

  pp.122-134

Yasushi Kojima, Michio Inoue, Takao Irimajiri

  Aktivitat des Eisenoxydes in FeO-Al2O3-SiO2 Schlacken bei 1600C.

  pp.135-142

Isao Masumoto, Koreaki Tamaki, Muneharu Kutsuna

  On sulfur hot cracking of weld metal.  pp.143-152

Eiiti Takizawa, Keiko Kobayasi

  On a generalized sampling theorem.  pp.153-160

Koichi Makino, Morio Masuda, Susumu Uchiyama

  Switching and hysteresis characteristics of exchange coupled

  composite soft magnetic film.  pp.161-166

Katsuhiko Okada, Fujiko Sugiyama, Kogo Kamiya

  Optimum condition for developement of SWA(II).  pp.167-171

Shintaro Otsuka, Yoshiyuki Sugiyama

  On the performance of a wing having tip clearance. Part 1. The case

  in which the tip clearance is contained within a non-uniform flow.

  pp.172-188